• Home
  • Categories
    • Modular Plants
    • Heat Transfer
    • Distillation
    • Process Intensification
    • Biogas
    • Chemicals
    • Natural Gas
    • Biodiesel
  • Contact Us
  • Facebook
  • LinkedIn
  • Twitter

COSTELLO

Chemical Process Engineering

  • Home
  • Categories
    • Modular Plants
    • Heat Transfer
    • Distillation
    • Process Intensification
    • Biogas
    • Chemicals
    • Natural Gas
    • Biodiesel
  • Contact Us

Fluxxion Metallic Membranes for Absorption, Stripping & Distillation – Part 2

06/22/2017 By R.C. Costello

In this second part of the series on the Fluxxion metallic membrane we are going to discuss two applications. Below we show the gas liquid interface that occurs at each pore. The following example demonstrates the stripping of Methyl Tert-Butyl Ether (MTBE) from water with the Fluxxion Metallic Membrane. Stripping of MTBE from Water The stripping MTBE from water by … [Read more...]

Fluxxion Metallic Membranes for Absorption, Stripping & Distillation – Part 1

06/12/2017 By R.C. Costello

Fluxxion Metallic Membranes can be used in place of packed columns.  They are usually placed in stacks and have no moving parts.   Industry needs new low energy separations with enhanced safety and increased flexibility. A membrane stack can have a 15 cm diameter and a thickness of 0.7 mm.  There would be 5 billion identical pores on each membrane with a diameter of 0.45 … [Read more...]

Batch vs. Continuous Distillation

12/08/2016 By R.C. Costello

Choosing the right distillation method is a highly important decision. However, if you’re not familiar with the two (2) types of distillation processes, making this choice can be difficult without good information. Typically, there are two types  of distillation processes that you could choose: batch or continuous. Because both of these methods have their inherent strengths and … [Read more...]

Distillation Part 3 – Special Topics in Distillation

11/29/2016 By R.C. Costello

Distillation is an essential process for the chemical process industries. If you haven’t already read Part 1 and Part 2 of this series, we recommend reading this information for a more thorough understanding of tower internals and reboilers. The final part of our distillation series will examine special situations that may occur through the course of the distillation. … [Read more...]

Distillation Part 1 – Packed Towers vs. Tray (Plate) Towers

11/16/2016 By R.C. Costello

Distillation is one of the most important unit operations in the Chemical Process Industry (CPI). The distillation process utilizes towers with internals. Examining the different tower types is a first step when learning about the distillation process. As one of the most essential pieces of a distillation system, towers need to fit the distillation process properly and must … [Read more...]

Recent Posts

  • Zero-Fouling with the Self-Cleaning Heat Exchanger
  • Empowering Young Women in Chemical Engineering
  • Catalytic Reactor Units for Continuous Hydrogenation and other Exothermic Catalytic Processes
  • Miniature Membrane Separators and Separating Organic Solvents
  • Scaleup of Chemical and Pharmaceutical Plants

Categories

  • Asphalt (1)
  • Biodiesel (7)
  • Biogas (3)
  • Boilers (1)
  • ChemCad (2)
  • Chemicals (11)
  • Company (1)
  • Compression (1)
  • Distillation (5)
  • Engineering Expertise (5)
  • Extraction (3)
  • Flow Chemistry (1)
  • Gasification (1)
  • Hazards (4)
  • Heat Transfer (5)
  • Hydrocarbon (2)
  • Mini Refineries (1)
  • Modular Plants (32)
  • Natural Gas (1)
  • Press Release (1)
  • Process Intensification (7)
  • Process Safety (2)
  • Pyrolysis (1)
  • Relief (1)

Copyright © 2022 · COSTELLO · All Rights Reserved